Boundary & Access
A straight boundary and a gate that closes properly, quoted with every post, panel, and fitting itemised.
What Goes Wrong
Most boundary failures trace back to one decision made at the start of the job.
Timber posts set without adequate concrete footings rot at ground level and begin to lean within two or three years.
Each post is set in concrete at the correct depth for its height, with footing depth noted in the quote before work starts.
A gatepost set too shallow or in undersized concrete pulls out of plumb under the repeated weight and swing of the gate.
Gatepost diameter, footing depth, and concrete volume are matched to the gate’s width and material before hardware is ordered.
Fitting panels to sloping ground without adjusting post heights leaves gaps at the base and a fence line that looks uneven.
Levels are measured at the survey stage so panel heights and gravel board positions are set before the quote is finalised.
A single combined price hides whether hinges, latch, drop bolt, and post caps are included, leading to unexpected additions on the day.
Hinges, latch, drop bolt, and fixings appear as separate line items so the quote reflects the full scope of the job.
Scope of Work
From a single dropped gate to a full boundary run, each element is quoted separately.
Damaged or rotten panels replaced with timber or composite, set on concrete posts with gravel boards at the base.
Leaning or rotten posts removed and reset in concrete footings, with panel alignment checked across the full run.
Timber gates hung on new or existing gateposts with heavy-duty hinges, a latch, and a drop bolt for double gates.
Steel gates fitted to concrete-set gateposts, with hinge load and post gauge matched to the gate’s width and weight.
Gate width, post alignment, and ground clearance measured for terraced and semi-detached side passages before hardware is ordered.
Full boundary runs for new build plots or garden resets, quoted with panel type, post type, and footing method specified.
Concrete gravel boards fitted below panels to prevent base rot.
Existing panels and posts cleared and taken away.
Hinges, latch, drop bolt, and post caps included in quote.
Level and plumb checked across the full fence run.
Why Choose Us
Boundary work that is quoted clearly, surveyed properly, and signed off only when the gate swings true.
Panels, posts, gate hardware, and removal are quoted as separate lines, not one combined figure.
Ground levels, post condition, and gate widths are measured before materials are specified or priced.
Slopes, narrow passages, and difficult ground are noted at survey stage, not added to the bill on the day.
Swing, latch, and drop bolt are tested and adjusted before the job is considered finished.
Every enquiry is scoped around Cambridge area fencing conditions.
The Process
Tell us the fence run length, gate size, and any ground or access issues you have already noticed.
The ground survey checks existing posts and returns an itemised quote covering all materials and labour.
Posts are set, panels hung, and gate alignment checked and adjusted before the job is handed back to you.
Pricing Estimates
| Job | Typical cost |
|---|---|
| Garden fencing panel job | £960-£1,800 |
| Small run of fencing | £1,800-£3,000 |
| Fence and gate package | £3,000-£5,000 |
| Large boundary fencing | £5,000-£8,000 |
Common Questions
Guide prices run from £960-£1,800 (Garden fencing panel job) to £5,000-£8,000 (Large boundary fencing). Longer runs with concrete posts or hardwood panels cost more than a short softwood section. You will receive a separate quote for fencing so you can see exactly what you are paying for.
The main factors are the length of the fence run, the material chosen, post depth required, and whether old fencing needs removing first. Gates add cost based on size, weight, and whether hinges and latches are included. Ground conditions such as clay, tree roots, or slopes also affect the labour time.
Quotes cover supply and fitting together as a single fencing price, so you are not left sourcing panels and posts separately. If you have already purchased materials, fitting-only can be discussed at the site visit. Either way, fencing is quoted as its own separate line item.
Closeboard panels suit most residential gardens where privacy is the priority. Picket or post-and-rail styles work well for front boundaries and period properties. Wrought-iron or steel gates complement brick or stone walls. The site visit covers style options alongside practical factors like wind exposure and boundary length.
Yes. Stepped or raked panel runs handle sloped ground, and posts can be set at varying depths to follow uneven terrain. Gravel boards at the base allow the fence to follow ground level without leaving gaps. Awkward ground is assessed at the site visit before any price is confirmed.
Swing direction, clearance, and opening width are all confirmed before installation. A gate that opens into a slope or clashes with a path is a common avoidable problem. Measurements and swing direction are agreed with you at the quoting stage so nothing is assumed.
Posts set in concrete at the correct depth are the foundation of a solid fence. Closeboard panels fixed to arris rails, with gravel boards at the base, resist movement and flex far better than panel-only systems. Gate posts are set deeper and braced to carry the additional load of a swinging gate.
Sagging is almost always caused by undersized posts, wrong hinge placement, or timber that was not properly treated before fitting. Using correctly rated hinges, setting posts in concrete, and treating or priming timber before installation reduces the likelihood of early movement significantly.
We cover Fencing & Gates in and around Cambridge, including Trumpington, Great Shelford, Sawston, Fulbourn, Histon, Cottenham, Waterbeach, Cambourne and Northstowe. If your area isn’t listed, send us a quick message to check.
Describe the fence run, the gate size, and any ground or access issues. The survey covers the plot and returns an itemised quote covering panels, posts, hardware, and removal, each as a separate line.